Tel : +91 22 2610 2833 / 2866
Email : contact@mananenterprise.com

Dynisco

Dynisco is a world leader in developing innovative, high-quality solutions for plastics extrusion processing for 60 years. Through engineering excellence built on the expertise of an engineering staff that averages 15-20 years experience, Dynisco sensors, controls, and analytical instruments have proven to offer better control, reduced downtime, minimum scrap, and unmatched reliability and working life. Today word ‘Dynisco’ stands for reliability, accuracy and highest level of performance.

MELT PRESSURE TRANSDUCERS

EPR3 Push Rod Melt Pressure Transducers

The push - rod design is suitable for applications where the use of a filled system may not be desirable, such as the extrusion of food and medical products and the manufacture of photographic film. Model EPR3 is available in pressure ranges from 0 - 1,500 through 0 - 10,000 psi.

Specifications:

- Better than ±0.5% accuracy

- Push - rod design

- Measures up to 750°F (400°C)

- All stainless steel, wetted parts

- Internal 80% shunt calibration

Download – Data Sheet
MDA410 Pressure Sensors

Model MDA410 uses a special high temperature fill (NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 1000°F. The transducers are supplied with a high accuracy (0.25%), great repeatability and reliability. An 6-pin bendix-style connector is used for easy connect and disconnect. The MDA410 is the most commonly used alternate fill melt pressure transducer in the world.

The MDA410 Series includes models MDA410, MDA412, and TDA412.

Specifications:

- 3.33 mV/V full scale output

- Accuracy of better than ±0.25%

- Pressure ranges from 0 - 35 BAR to 0 - 700 BAR

- Handles temperatures up to 1000°F

- Superior thermal compensation

- Inconel diaphragm

- Internal 80% shunt calibration

- CE Approved

Download – Data Sheet
Echo Series

The Echo™ Series of melt pressure sensors offer quality performance and value for plastic processing utilizing standard configurations and pressure ranges.

Specifications:

- 2 year warranty and 60 years of Dynisco industry experience

- Accuracy better than ±0.5%

- TiAlN diaphragm coating is standard

- mV/V, 0-10VDC, or mA outputs available

- Integral temperature sensor option

- Available in configurations that fit most extruder applications

- 1.5M, 3M, 5M, 7.5M & 10M psi pressure range capability

 

Download – Data Sheet
Guardian Series

Machinery Directive standard EN ISO 13849-1 is a European safety regulation. This is a generic standard defining the requirements for the safety-related parts of control systems. Guardian meets the directive without the expense and complication of redundant sensors and external relay modules. Guardian also complies with NFPA 79 clauses A.9.2, A.9.4.1, A.9.4.3.2 as a way of evaluating safety-related aspects of control functions.

Specifications:

- Integral relay switch for redundant safety and future compliance

- 3rd-party agency analysis (exida™) and self-certified based on FMEDA analysis and internal audit.

- Meets Performance Level ‘c’ as defined by the Machinery Directive (single sensor installed per Category 1).

- Meets Performance Level ‘d’ as defined by the Machinery Directive (two sensors installed per Category 3).

- Meets the following compliance directives, when properly installed and used:

  - Machinery Directive 2006/42/EC

  - NFPA 79 clauses A.9.2, A.9.4.1, A.9.4.3.2

  - EMC Directive 2004/108/EC

  - PED 97/23/EC

- Available on popular mV/V (PT, MDA, DYN) and mA-HART SPX models

Download – Data Sheet
DYN-X-MA Series

The DYN-X-MA sensor provides the industry standard 4-20 mA amplified signal designed to work with DCS and PLCs. The DYN-X-MA comes equipped with adjustable zero and span side-mounted potentiometers. DYN-X-MA Series sensors can be re-zeroed in two ways: locally via the zero potentiometer or remotely via shorting two pins together (contact closure). Optional thermocouple or RTD configurations are available to provide melt temperature. 

Specifications:

- Adjustable zero and span, via side-mounted pots

- Accuracy better than ±1.0%

- DyMax® coated stainless steel wetted parts

- 4-20 mA output

- 0-500 to 0-30,000 psi

- Internal 80% shunt calibration

Download – Data Sheet
DYN-X-V Series

The DYN-X-V transmitters provide the industry standard 0 - 10 Vdc amplified signal designed to work with DCS and PLCs. The DYN-X-V comes equipped with zero and span pots to adapt the transmitter to process conditions. Optional thermocouple or RTD configurations are available to provide melt temperature. The DYN-X-V features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

Specifications:

- Adjustable zero and span

- Accuracy better than ±1.0%

- DyMax® coated stainless steel wetted parts

- 0 - 10 Vdc outputs

- 0 - 500 to 0 - 10,000 psi

- Internal 80% shunt calibrations

Download – Data Sheet
DYN-X Series

The DYN-X Series transducer is a +/- 1.0% sensor ideal for general purpose melt pressure measurements requiring simple installation, repeatability and reliability. It is the value leader and widely accpeted by OEMs and users throughout the world. The DYN-X transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. Optional thermocouple or RTD configurations are available to provide melt temperature. The DYN-X features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

Specifications:

- Economical and repeatable pressure meausurements

- Superior abrasion resistance

- Stability and repeatability

- Variety of pressure ranges

- Easy to calibrate

Download – Data Sheet
MDA420 Series

The MDA420 transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The MDA420 comes equipped with an eight pin Bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The MDA420 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

Specifications:

- Accuracy better than ±0.25%

- DyMax® coated stainless steel wetted parts

- Proven sensor design

- Excellent thermal stability and repeatability

- 0 - 500 to 0 -30,000 psi

- Internal 80% shunt calibration

Download – Data Sheet
MDA460 Series

The MDA460 transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The MDA460 comes equipped with a six pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The MDA460 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

Specifications:

- Accuracy better than ±0.5%

- DyMax® coated stainless steel wetted parts

- Proven sensor design

- 0 - 500 to 0 -30,000 psi

- Internal 80% shunt calibration

Download – Data Sheet
PT450 Series

For easy installation, the flexible stem transducer is offered in flanged (model PT450FA) and threaded (model PT450TA) versions. Both models are ideal for processing low viscosity materials and applications such as fiber spinning and polymer transport lines.

The PT450 Series includes models PT450F and PT450T.

Specifications:

- Accuracy of better than ±0.25%

- Choice of flanged or threaded configurations

- 0 - 250 to 0 - 10,000 psi

- Withstands processes up to 700°F

- Internal 80% shunt calibration

- Replacement for traditional “button - seal” units

Download – Data Sheet
PT420A Series

The PT420A Series transducer is a +/- 0.25% sensor ideal for melt pressure applications requiring high accuracy, simple installation, repeatability and reliability.

PERFORMANCE CHARACTERISTICS:

- Output: 3.33 mV/V +/- 2.0%

- Input Voltage: 10 Vdc recommended, 12 Vdc maximum

- Combined Error: +/- 0.25% FSO, (Including Linearity, Repeatability & Hysteresis) +/- 0.5% FSO for 500, 750, 1,000 psi ranges

- Repeatability: +/- 0.1%FSO, +/- 0.2% FSO for 500, 750, 1,000 psi ranges

- Configuration: Four-arm bonded foil Wheatstone bridge strain gage

- Bridge Resistance: Input: 345 Ohms minimum, Output: 350 Ohms +/- 10%

- Over Pressure: 2 X FSO or 35,000 psi whichever is less

- Zero Balance: +/- 5% FSO

- Internal Shunt Calibration (R-Cal): 80% FSO +/- 0.5%

- Insulation Resistance: 1000 megohms @ 50 Vdc

 

TEMPERATURE & MECHANICAL CHARACTERISTICS

- Max Diaphragm Temperature: 750oF (400oC)

- Zero Shift (due to temperature change): 15 psi/100oF Typical (27 psi/100oC)

- Electronics Operating Temperature: 250oF (121oC)

- Zero Shift Due to Temperature Change: +/- 0.01% FS/oF max (+/- 0.02% FS/oC max)

- Sensitivity Shift Due to Temperature Change: +/- 0.005% FS/oF max (+/- 0.01% FS/oC max)

- Mounting Torque: 500 inch/lbs. maximum

- Standard Wetted Parts: Dymax® coated 15-5 PH SST

Download – Data Sheet
PT462E-M10 Series

Model PT462E - M10 melt pressure transducer utilizes a small 6mm sensing element for space restricted areas making it the ideal choice for small extruders and rheometers. Model PT462E - M10 incorporates an 18" flexible stem to isolate the electronics housing from the high process temperatures.

Specifications:

- 6 mm sensing element

- Fits in space restricted areas, reduces mounting hole dead space

- Internal 80% shunt calibration

- Easy set - up

- 0 - 5,000 to 0 - 10,000 psi

- Choice of pressure ranges

- Good stability and repeatability

- Reliable pressure measurement

- Flexible stem • Easy to install and ideal for high local temperatures

Download – Data Sheet
PT467E-M10 Series

Model PT467E - M10 features a small, 6 mm sensing element that is ideal for use in space restricted areas or on small extruders or rheometers. Model PT467E - M10 is similar to the model PT462E - M10 yet features a 0.06" diameter exposed capillary to allow 1/16" radius bends in applications.

Specifications:

- 6 mm sensing element

- Fits in space restricted areas

- Exposed, bendable capillary

- Ideal for injection molding nozzles

- Internal 80% shunt calibration

- Easy set - up

- 0 - 5,000 to 0 - 10,000 psi

- Choice of pressure ranges

- Good stability and repeatability

- Proven sensor design

- Flexible stem 

- Easy to install, ideal for high local temperatures

- Classic, standard design 

- Economically priced

Download – Data Sheet
PT460 Series

The PT460E Series transducer is a ±0.5% sensor ideal for melt pressure applications.

Specifications:

- Accuracy better than ±0.5%

- DyMax® coated stainless steel wetted parts

- Proven sensor design

- 0 - 500 to 0 -30,000 psi

- Internal 80% shunt calibration

Download – Data Sheet
PT460XL Series

A ±1.0% sensor ideal for abrasive and/or corrosive melt pressure applications.

Specifications:

- Accuracy better than ±1.0%
- Inconel diaphragm
- Superior temperature stability
- Patented sensing element
- 0 - 3,000 to 0 -30,000 psi
- Internal 80% shunt calibration
Download – Data Sheet
MRT462 Series

Now, users can select from among four pressure ranges on one transducer with the new Dynisco MRT, the first multi-range pressure transducer. By simply turning a rotary switch via an access pot on the transducer, four potential pressure ranges can be selected.

Specifications:

- Accuracy of better than ±1.0%
- Reliable pressure measurement
- Four user selectable pressure ranges in one model
- Maximizes inventory flexibility
- Externally selectable range via rotary switch
- Maximum versatility for changing process conditions
- 3.33 mV/V FSO for selected range
- Standard low level output
- Internal 80% shunt calibration
- Easy set-up
- All stainless steel wetted parts
- Corrosion resistant
- Proven sensor design
- Good stability and repeatability
 
Download – Data Sheet
MRT463 Series

Now, users can select from among four pressure ranges on one transducer with the new Dynisco MRT, the first multi-range pressure transducer. By simply turning a rotary switch via an access pot on the transducer, four potential pressure ranges can be selected.

Specifications:

- Accuracy of better than ±1.0% • Reliable pressure measurement

- Four user selectable pressure ranges in one model

- Maximizes inventory flexibility

- Externally selectable range via rotary switch

- Maximum versatility for changing process conditions

- 3.33 mV/V FSO for selected range

- Standard low level output

- Internal 80% shunt calibration

- Easy set-up

- All stainless steel wetted parts

- Corrosion resistant

- Proven sensor design

- Good stability and repeatability

- Type J thermocouple

- Simultaneously measure pressure/temperature in one location

 

Download – Data Sheet

MELT PRESSURE TRANSMITTERS

SPX 2-Series

Available with a variety of different process and electrical connections. The SPX 2-Series is an all welded construction. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature.

The SPX 2 Series includes models 2241, 2242, 2243,2244, 2290, 2291,  and 2292.

 

Specifications:

- 4-20mA loop-powered output

- +/- 0.25% accuracy available

- Wide selection of pressure ranges available

- Turndown 6:1 (3:1 Turndown for model SPX 2290)

- Configurations available for use in hazardous locations

- Remotely configurable via HARTTM

- Precise, repeatable pressure measurements

- Output supplied directly to DSC or PLC

- Meets CE requirements

- CE ATEX Intrinsically Safe Approved

- FM Explosion Proof Approved

- CSA Explosion Proof Approved

- SIL 2 Certified (Pressure Output)

- PL'c' Certified (Relay Output)

- Additional approvals are available

 

Download – Data Sheet
SPX-T 3-Series

The SPX-T delivers the best spec performance in the line. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices.

The SPX-T Series includes models SPX3242, SPX3243, SPX3342, SPX3343, SPX3290, SPX3291, SPX3390, and SPX3391.

Specifications:

- 4-20mA loop-powered output

- +/- 0.15% accuracy available

- Reduced temperature drift by 80% over non compensated units

- Temperature output available (RTD or 4-20mA)

- Wide selection of pressure ranges available

- Turndown 6:1

- Configurations available for use in hazardous locations

- Remotely configurable via HART

- Precise, repeatable pressure measurements

- Output supplied directly to DSC or PLC

- Meets CE requirements

- CE ATEX Intrinsically Safe Approved

- FM Explosion proof approved

- CSA Explosion proof approved

- SIL 2 Certified (pressure output)

- PL'c' Certified (relay output)

- Additional approvals are available

Download – Data Sheet
SPX 4-Series

All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature.

The SPX4 Series includes models SPX4222, SPX4622, SPX4352, SPX4672, SPX4232, and SPX4502.

Specifications:

- 4-20mA loop-powered output

- +/- 0.25% accuracy available

- Wide selection of pressure ranges available

- Turndown 6:1

- Configurations available for use in hazardous locations

- Remotely configurable via HART

- Precise, repeatable pressure measurements

- Output supplied directly to DSC or PLC

- Meets CE requirements

- CE ATEX Intrinsically Safe Approved

- SIL 2 Certified (pressure output)

- PL'c' Certified (relay output)

- Additional approvals are available

Download – Data Sheet
SPX 5-Series

The Dynisco SPX 5-Series is a smart 4-20mA pressure transmitter that includes DynaLarity™, a Dynisco innovation that uses an advanced algorithm that will linearize offsets due to process effects on the sensor.  The SPX 5-Series is an all welded construction designed for use in hazardous locations and is available with a variety of process and electrical connections.

The SPX5 Series includes models SPX5342, SPX5343, SPX5344, SPX5390, SPX5391, and SPX5392.

Specifications:

- 4-20mA loop-powered output

- Improved accuracy with Dynalarity ±0.2% available

- Wide selection of pressure ranges available

- Turndown 3:1

- Configurations available for use in hazardous locations

- Remotely configurable via HARTTM

- Precise, repeatable pressure measurements

- Output supplied directly to DSC or PLC

- Meets CE requirements

- CE ATEX Intrinsically Safe Approved

- FM Explosion Proof Approved

- CSA Explosion Proof Approved

- SIL 2 Certified (Pressure Output)

- PL'c' Certified (Relay Output)

- Additional approvals are available

Download – Data Sheet
MDT Series

All models are available in 4-20 mA, 0-5 VDC and 0-10 VDC, 2-, 3- and 4-wire high level outputs. Many of the features found in Dynisco's standard MDA-series have been incorporated into the amplified MDT-series, including proven bonded strain gauge construction for stable operation, a flexible armored capillary between the rigid stem and the amplifier housing and a flush diaphragm. Another advantage is the electrical built-in calibration.

The MDT Series includes model MDT422

Specifications:

- Installation for media temperature up to 400°C

- Flexible capillary between rigid stem and housing

- Electrical built-in calibration

- Various high level outputs

- 4-20 mA, 2-wire 0-10 V DC, 3/4-wire and other volt output signal ranges

Download – Data Sheet
PT46X4 Series

The PT46x4 sensor provides the industry standard 4-20 mA amplified signal designed to work with DCS and PLCs. The PT46X4 comes equipped with adjustable zero and span side-mounted potentiometers. PT46X4 Series mA sensors can be rezeroed in two ways: locally via the zero potentiometer, or remotely via shorting two pins together (contact closure). Optional thermocouple or RTD configurations are available to provide melt temperature. Features a 1/2-20 UNF thread for simple and easy installation in standard transducer mounting holes.

The PT46X4 Series includes models PT4604, PT4624, PT4634, TPT4604, TPT4624, and TPT4634. 

Specifications:

- Adjustable zero and span, via side-mounted pots

- Accuracy better than ±0.5%

- DyMax® coated stainless steel wetted parts

- 4-20 mA output

- 0-500 to 0-30,000 psi

- Internal 80% shunt calibration

- 3rd-party agency analysis (exida™) and self-certified based on FMEDA analysis and internal audit

- Output signal meets Performance Level ‘c’ as defined by the Machinery Directive (Category 1)

- Meets the following compliance directives, when properly installed and used:

  - –SIL2

  - Machinery Directive EN ISO 13849-1

Download – Data Sheet
PT46X6 Series

The PT46X6 transmitters provide the industry standard 0 - 10 Vdc amplified signal designed to work with DCS and PLCs, 1 - 11 Vdc outputs are also available. The PT46X6 comes equipped with zero and span pots to adapt the transmitter to process conditions. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT46X6 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

The PT46X6 Series includes models PT4606, PT4626, PT4636, TPT4606, TPT4626, and TPT4636. 

Specifications:

- Adjustable zero and span

- Accuracy better than ±0.5%

- DyMax® coated stainless steel wetted parts

- 0 - 10 Vdc and 1 - 11 Vdc outputs

- 0 - 500 to 0 - 30,000 psi

- Internal 80% shunt calibrations

Download – Data Sheet

SMART PRESSURE TRANSMITTERS

SPX - Smart Pressure Sensors for Flange Mount Installations Model 2291

The SPX2291 is a smart 4 - 20 mA button seal pressure transmitter designed for use in hazardous locations. The SPX2291 is all welded construction that features a large diaphragm and mounting flange for easy installation. Optional thermocouple or RTD configurations are available to provide melt temperature. The SPX2291E has explosion proof approval for Class 1, Division I, Groups A, B, C & D. The explosion proof model employs a conduit fitting with 42” leads. The SPX2291S is ATEX/Intrinsically Safe approved for II 1 G 100a Eex ia IIC, Zones 0 and 1. The intrinsically safe and ATEX models can be supplied with either a conduit fitting or a hermetic 6 pin Bendix connector.

Download – Data Sheet
SPX - Smart Pressure Sensors for Small Flange Mount Installations Model 2243

SPX - Smart Pressure Sensors for Small Flange Mount Installations Model 2243
The SPX2243 is a smart 4 - 20 mA pressure transmitter designed for use in hazardous locations. The SPX2243 is an all welded construction that features a small diaphragm and a mounting flange for easy installation. Optional thermocouple or RTD configurations are available to provide melt temperature. The SPX2243E has explosion proof approval for Class 1, Division I, Groups A, B, C & D. The explosion proof model employs a conduit fitting. The SPX2243S is ATEX/Intrinsically Safe approved for II 1 G 100a Eex ia IIC, Zones 0 and 1. The intrinsically safe and ATEX models can be supplied with either a conduit fitting or a hermetic 6 pin Bendix connector.

Download – Data Sheet
SPX - Smart Pressure Sensors for Threaded Installations Model 2242 / 4222

The SPX 2242 / 4222 is a smart 4 - 20 mA pressure transmitter designed for use in hazardous locations. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLCs, computers and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature. The SPX 2242 / 4222 is ATEX/Intrinsically Safe approved for II 1 G 100a Eex ia IIC, Zones 0 and 1. The SPX 2242 / 4222 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections. 

Download – Data Sheet
SPX-T - High Accuracy Smart Pressure Sensors with Temperature Compensation Model 3291

The SPX-T is a smart 4-20mA pressure transmitter that includes Temperature Compensation and DynaLarity™, a Dynisco innovation. The SPX-T delivers the best spec performance in the line. Temperature Compensation is based on a primary RTD measurement that compensates for temperature variations which reduces temperature-related drift and increases accuracy. No need to re-zero for temperature changes after installation. DynaLarity uses an advanced algorithm that linearizes offsets due to process effects on the sensor. Combined Temperature Compensation and DynaLarity reduces temperature-related drift by as much as 80% and improves accuracy by more than 60% over other sensors. Process temperature output is available. HART communication is standard. Explosion proof, Non-incendive and Intrinsically Safe configurations are pending approval. The SPX3391 is an all-welded construction that features a large diaphragm and mounting flange for easier installations.

Download – Data Sheet

INSTRUMENTATION

1480 1/8 DIN Panel Indicator

The 1480 is a Universal Pressure or Temperature Input Indicator with single or dual configurable alarms, as well as optional linear retransmission of displayed Process Variable. Ideal for use in Extrusion applications.

Download – Data Sheet
1490 5 Digit 1/8 DIN Panel Indicator

The 1490 is a Universal Input Indicator with single or dual configurable alarms, optional linear retransmission of Process Variable, Transmitter power supply option as well as optional Modbus communications.

Download – Data Sheet
UPR900 Process Indicator

The UPR900 is a compact 1/4 DIN process indicator. The UPR900 can display your choice of engineering units related to a selectable range of input types. Add an optional secondary input for an all-in-one display of polymer melt pressure and temperature. The secondary input can be strain guage to indicate differential pressure measurement. The UPR900 includes two standard assignable alarms with the option to add a 3rd. The LCD graphical display allows for easy reading of trending graphs with user selectable monochromatic configurations. The UPR900 is easily field-configured, can be programmed remotely via optional Modbus RS-485 or can be programmed with BlueControl software.

Download – Data Sheet
ATC990 Process Controller

The ATC990 with a graphical/text LCD display is a universal input process controller with advanced functionality including Trend views as well as Digital Inputs, USB and data logging options. It provides a cost-effective way to control a single process parameter, such as for a plastics extruder. Designed to improve user efficiency many features are integrated to reduce commissioning time, simplify operation and minimize maintenance downtime. Reliably auto-tune and alarm on strain guage, DC voltage, temperature or current inputs. The ATC990 can also control differential pressure when an optional secondary strain gauge input is used. Other useful display information includes alarm set points, peak values, error conditions, and engineering unit beacons. The controller provides a quick and easy set-up which includes a step by step configuration wizard which starts automatically on the first start up. An optional 24Vdc output supply is also available.

Download – Data Sheet

ACCESSORIES

Rupture Disks / Burst Plugs - BP420 Series

The Model BP420 burst plugs are designed specifically for use in plastic extrusion systems. Burst Plugs (also known as rupture disks) are designed for reliable, emergency relief of excess pressure in a system. The Model BP420 will instantaneously rupture at a specific, predetermined pressure and temperature. Each one piece assembly consists of a 304 stainless steel body with a welded Inconel rupture disk. The disk is flush with the tip of the burst plug with no cavity for product build up. A burst plug may be specified for primary relief in applications where pressure build-up can occur so rapidly that the response time of a relief valve is inadequate,such as in a polymerization reaction vessel. All burst plugs are tested at rated burst pressure and temperature. In addition, markings on the burst plugs are laser engraved and more visible, and each burst plug is labeled and shipped in a protective package. 

Download – Data Sheet
Transducer Mounting Hole Cleaning Kit

The cleaning tool kit was designed by Dynisco for use in removing excess plastic from mounting holes for pressure and temperature transducers. Installation of transducers into improperly cleaned or sized holes is one of the major causes of damage to these instruments. With this kit, the .312" tip diameter hole, the 45 degree seating surface, and the .451" hole can be cleaned. The kit includes a gauging plug which is used to verify that the hole has been correctly machined and cleaned. M10 and M18 cleaning kits also available. 

Download – Data Sheet
Transducer Mounting Hole Machining Tool Kit

The Transducer Mounting Hole Machining Tool Kit contains all of the necessary drills and taps to prepare a standard 1/2 - 20 UNF transducer mounting hole. The kit contains the special pilot drill required to machine the 45 degree seat. All tools included in this kit are made of premium grade, high strength tool steel. Care should be taken in the use of proper speeds and feeds, lubricants, and a method to assure continual alignment of each progressing tool. Consult Dynisco for additional or more specific information. M10 and M18 kits also available.

Download – Data Sheet
Cable Assemblies & Connectors

The cable assemblies provide the electrical hookup from the transducer to the display instrumentation. The assemblies consist of a transducer mating connector and a length of shielded, 6 conductor cable with stripped leads.

Download – Data Sheet

MERCURY FREE & ALTERNATIVE FILL SENSORS

PT410 / 412 Alternate Fill Pressure Sensors (NaK)

The NaK fill material meets the requirements set forth by both the FDA and USDA for contact with food and medical products. The PT410 Series transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The PT410 comes equipped with an eight pin bendix connector.

The PT410/412 Series includes models PT410, PT412, TPT410, and TPT412.

Specifications:

- Accuracy better than ±0.25%

- Measures up to 1000°F (538°C)

- NaK fill meets FDA and USDA requirements

- Inconel diaphragm

- 0 - 500 to 0 -10,000 psi

- 3.33 mV/V FSO

 

Download – Data Sheet
PT418 | PT419 Sensors (Oil)

Model PT418/419, uses an oil fill that meets the requirements of the FDA and the USDA to allow accurate pressure measurements in processes where mercury is not allowed. The PT418/419 is the ideal unit for medical and food packaging, food extrusion and medical applications.

The PT418/419 Series includes models PT418, PT419, TPT418, and TPT419.

Specifications:

- Better than ±0.5% accuracy

- Special fill material

- 0 - 1000 to 0 - 10,000 psi

- 3.33 mV/V FSO

- Fill material meets FDA and USDA requirements

 

 

Download – Data Sheet
PT130 | PT140 | PT150 | PT160 Sensors

The series withstands cyclic pressure and provides outstanding performance under the severe demands of measuring the injection ram and clamp pressure of injection molding machines. Variations in the hydraulic pressure profile indicate irregularities during the injection and feeding stages of the molding operation and provide information about the stability of the injection ram system.

Specifications:

- 3 mV/V output

- Accuracy ±0.50%

- Handles temperatures up to 285°F (140°C)

- All welded, stainless steel construction

- Rugged design

- Internal shunt calibration

- Compact

Download – Data Sheet
PT375 Transducer

The PT375 pressure transmitter is designed for applications requiring zero volume pressure port, fast response time, and stringent cleanability standards.  The metal-t0-metal high pressure seal offers reliable pressure measurements of slurries, viscous liquids and other media that can be homogenized. 

Specifications:

- 3 mv/v full scale output

- Accuracy ±0.50%

- Pressure ranges 0-1,000 PSI to 0-30,000 PSI

- Iconel 718 pressure fitting

- Zero volume pressure port

- Meets cleanability standards

- Metal-to-metal pressure seal

- Internal 80% shunt calibration

- CE approved

Download – Data Sheet
PT199 Pressure Sensor

Dynisco's PT199 pressure transmitter provides information on various gas turbine system pressures for both gas and fuel flow control and/or turbine firing temperature control. 

The PT199 Series includes models PT199, PT199B, PT199S, and APT199S.

Specifications:

- Accuracy ±0.25%

- Stainless steel construction

- Sealed zero and span potentiometers

- Tight temperature compensation

- Ranges 0-15 PSI through 0-15,000 PSI

- Advanced electronic design

- Internal shunt calibration

 

Download – Data Sheet
PT303 Pressure Sensor

They heavy duty construction and wide pressure ranges offer trouble-free operation and flexibility to meet your requirement.

Specifications:

Accuracy ±0.25%

Stainless steel construction

Heavy duty construction

Ranges 0-110 PSI through 0-750 PSI

Advanced electronic design

 

Download – Data Sheet
Dynisco Mercury Free – Vertex Sensor

The pressure range for Vertex is now available from 250 - 10,000 PSI.  Vertex is more accurate within our Polymer Test  equipment than any other mercury-filled sensor and is ideal for industrial applications that require low pressure. Not only is this an overall improvement to one’s process, but it helps with customers that are focused on sustainability and zero-waste. 

Specifications:

- No fill material

- RoHS compliant for sustainability programs

- Robust, thicker Inconel diaphragm is coated with DyMax®

Optional Type J or K thermocouple is available to provide a melt temperature signal as well as a 4-20 mA temperature output

Equipped with a 1/2-20 UNF for installation in standard transducer mounting holes. Also available to install 1/2-20 UNF units into a Button Seal application

Diaphragm composition of Inconel 718 coated with the abrasion resistant properties of DyMax®

Sealed, welded shell and electrical connection available if washdown capability is needed for food or mechanical applications (not available if thermocouple option TCx is selected)

- Available with thermocouple temperature output

- 250-10,000 PSI pressure range capability

- HART digital communication available

- Direct measurement tip is a simple and elegant design with a more robust diaphragm

Direct measurement of process reduces errors transferred by complicated internal support structures, transmission fill materials, or moving push rods

Designed to work with universal pressure indicators

 

Download – Data Sheet
830 | 850 | 860 Series

Interchangeable configuration allows users to specify the pressure range, pressure port and output level that meet specific application requirements. A bonded strain gauge sensor provides reliable operation in a wide range of industrial applications.

The 830/850/860 Series includes models G830, S830, A830, G850, S850, A850, G860, S860, and A860. 

Download – Data Sheet
831 / 851 / 861 Series Pressure Sensors

Interchangeable configuration allows users to specify the pressure range, pressure port and output level that meet specific application requirements. A bonded strain gauge sensor provides reliable operation in a wide range of industrial applications.

Specifications:

- Accuracy ±0.25%

- 3 mV/V, 5 Vdc and 10 Vdc outputs

- 0 - 100 to 0 - 30,000 psi

- Excellent temperature compensation

- Internal shunt calibration

- Bonded strain gauge sensor

 

 

Download – Data Sheet
SPX 228X Series

The Dynisco SPX228X is an all welded construction smart industrial 4-20mA pressure transmitter designed for use in hazardous locations. Models are available in PSIG, PSIA, and
PSIS. Optional pressure fittings and electrical terminations are available.

This series includes models SPX2280 and SPX2281 and SPX2282

Specifications:

- 4-20mA loop-powered output

- +/- 0.25% accuracy available

- Wide selection of pressure ranges available

- Turndown 3:1

- Configurations available for use in hazardous locations

- Remotely configurable via HARTTM

- Precise, repeatable pressure measurements

- Output supplied directly to DSC or PLC

- Meets CE requirements

- CE ATEX Intrinsically Safe Approved

- FM Explosion Proof Approved

- CSA Explosion Proof Approved

- SIL 2 Certified (Pressure Output)

- PL'c' Certified (Relay Output)

- Additional approvals are available

Download – Data Sheet
EPR3 Push Rod Sensors

The push - rod design is suitable for applications where the use of a filled system may not be desirable, such as the extrusion of food and medical products and the manufacture of photographic film. Model EPR3 is available in pressure ranges from 0 - 1,500 through 0 - 10,000 psi.

Specifications:

- Better than ±0.5% accuracy

- Push - rod design

- Measures up to 750°F (400°C)

- All stainless steel, wetted parts

- Internal 80% shunt calibration

Download – Data Sheet
MDA410 Pressure Sensors

Model MDA410 uses a special high temperature fill (NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 1000°F. The transducers are supplied with a high accuracy (0.25%), great repeatability and reliability. An 6-pin bendix-style connector is used for easy connect and disconnect. The MDA410 is the most commonly used alternate fill melt pressure transducer in the world.

The MDA410 Series includes models MDA410, MDA412, and TDA412.

Specifications:

- 3.33 mV/V full scale output

- Accuracy of better than ±0.25%

- Pressure ranges from 0 - 35 BAR to 0 - 700 BAR

- Handles temperatures up to 1000°F

- Superior thermal compensation

- Inconel diaphragm

- Internal 80% shunt calibration

- CE Approved

Download – Data Sheet